Miranda Kaleido-X Manual de instalación descargar pdf (Pagina 86)

Kaleido-X (14RU) Expansion

Recovering an Expansion Frame

11 Click Save, and then click Apply settings in the sidebar.

Frame B automatically reboots (this should take about two minutes).

12 When Frame B has finished rebooting, re-insert the front panels of the KXO cards in

slots A and B (if present).

13 Open XAdmin using the new Frame IP Address you assigned in step 10.

14 Verify that Frame B is working correctly, and that there are no errors reported on the

Status and Options page.

At this point, Frame B is operating independently, but using its own copy of the

expansion system database. You can now:

• join another frame to Frame B in an expansion configuration

•modify/replace the Frame B database so that it corresponds to the standalone

operation of the frame (refer to the procedures described on

page 68).

If the initial condition that caused Frame A to fail is resolved, and you wish

to return the expansion frame to its original state:

•Power down both Frame A and Frame B.

• Insert the KXO-EXP cards and reconnect the expansion cables.

•Power up Frame A then Frame B.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 96 97

Sin comentarios

Miranda Kaleido-X Manual de instalación Pagina 86