Miranda Kaleido-X Manual de instalación descargar pdf (Pagina 41)

Kaleido-X (7RU)

Hardware Description & Installation Manual

Front Card-Edge Indicators

The following LED status indicators are visible on the front edge of the input cards (listed

from top to bottom):

Front Card-Edge Controls

One button is located on the front card edge:

Front Card-Edge Connector

An ICAT connector is located on the front card edge at the bottom below the RESET button.

This connector is reserved for factory use, and has no user functionality.

KXO-24Router Card

The KXO-24Router card provides 24 external monitoring outputs that can be assigned to

any of the 96

HD/SD SDI inputs of the Kaleido-X. Two cards can be installed in a Kaleido-X to

provide up to 48

outputs. These unprocessed outputs can be used to feed high-quality CRT

monitors, test equipment such as waveform monitors, as well as master control or

production switchers.

LED label LED color Interpretation

Card Status Green

Red

Orange

Blinking Red

Card OK

Error

Programming in progress

Upgrade in progress

SDTI Status Green

Red

Valid signal present

No signal or invalid signal

IN 1 Status to

IN 16 Status

Green

Red

Valid signal present

No signal or invalid signal

Button label Function

Reset Reset the FPGA and restart the card (for maintenance use)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 96 97

Sin comentarios

Miranda Kaleido-X Manual de instalación Pagina 41