Miranda Kaleido-X Instrucciones de operaciones descargar pdf (Pagina 19)

Kaleido-X

Quick Start Guide

Verifying that the Cards are Ready

To verify that the cards (modules) are ready:

• Check the status LEDs on each card installed in the Kaleido-X frame. Make sure that

none are indicating an error condition (see table below).

Photograph of a Kaleido-X (7RU) frame showing LED indicators on modules.

Step 2: Networking Setup

For the Kaleido-X unit to join a TCP/IP network, it must be configured with an IP address, a

network mask, a gateway, and a system name. In addition, a client PC must be configured

to communicate with the Kaleido-X (see

Configuring a Client PC on page 14). You must also

configure the Kaleido-RCP2 unit, and any Audio Bridge Terminal unit you may have

ordered.

The Kaleido-X is shipped with the following default settings:

CPU LED Color Card Status Action Required

Solid green Ready None

Red Fault Verify that the card is securely seated in the proper

slot in the frame. If status remains unchanged,

remove the card, reseat it and then reboot.

Flashing green Rebooting Wait for card to reboot before starting operations.

Kaleido-X (7 RU) Kaleido-X (14 RU)

Frame IP address 10.0.3.70 10.0.3.70

Network mask 255.255.0.0 255.255.0.0

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 38 39

Sin comentarios

Miranda Kaleido-X Instrucciones de operaciones Pagina 19